1: Transmission 1 by 1
2: Periodic transmission
5849
Installation Date
Displays or prints the installation date of the machine.
5849 002 Switch to Print
Determines whether the installation date is printed on the
printout for the total counter.
[0 to 1/1]
0: OFF (No Print)
1: ON (Print)
5849 003 Total Counter Displays the total counter of the machine installation's day.
5856
Remote Update
Allow ROM Update from Remote Source
When set to "1" allows reception of firmware data via the local port (IEEE 1284) during
a remote ROM update. This setting is reset to zero after the machine is cycled off and on.
[0to1 / 0 / 1]
0: Not allowed
1: Allowed
5857 Save Debug Log
5857 001
On/Off
Switches on the debug log feature. The debug log cannot be captured until this feature
is switched on.
[0 to 1/0]
0: OFF
1: ON
5857 006
Save to SD
Saves the debug log of the input SC number in memory to SD card.
5857 012
Erase SD Log
Printer Engine Service Mode
117
To Next Page
Loading...
