Erases all debug logs on the SD Card. If the card contains only debugging files generated
by an event specified by SP5858, the files are erased when SP5857 010 or 011 is
executed.
To enable this SP, the machine must be cycled off and on.
5857 013
FreeSpaceonSD
Displays the amount of space available on the SD card.
5857 014
SD to SD (4MB)
Copies the last 4MB of the log (written directly to the card from shared memory) onto an
SD card.
5857 015
SD to SD (Any)
This SP copies the log on an SD card (the file that contains the information written directly
from shared memory) to a log specified by key number.
5857 017
Make SD LogFile
This SP creates a 4 MB file to store a log on an SD card.
5858
Debug Save When
These SPs select the content of the debugging information to be saved to the destination.
Refer to Section 4 for a list of SC error codes.
5858 001 EngineSC Error Stores SC codes generated by copier engine errors.
5858 002 SystemSC Error Stores SC codes generated by GW controller errors.
5858 003 Any SC Error [0 to 65535/0/1]
5858 004 Jam Stores jam errors.
5859 LogSaveKey No.
5859 001 Key 1
These SPs allow you to set up to 10 keys for log files for
functions that use common memory on the controller board.
[-9999999 to 9999999/0/1]
5859 002 Key 2
5859 003 Key 3
5859 004 Key 4
5859 005 Key 5
5. Service Tables
118
To Next Page
Loading...
