5859 006 Key 6
5859 007 Key 7
5859 008 Key 8
5859 009 Key 9
5859 010 Key 10
5860 SMTP/POP3/IMAP
5860 002 SMTP SW Port No. Input the SMTP server port number
5860 003 SMTP Auth Encryp
SMTP authentication enable/disable.
[0-1/0/2]
0: Disable
1: Enable
5860 006 SMTP Auth encryp
Encryption mode for SMTP authentication enable/
disable (Only valid if 5860 3 is set to "enable")
[0-2/0/1]
0: Automatic
1: No encryption
2: Encrypt
5860 007 POP Before SMTP
Enable/disable POP before SMTP. If the SMTP server
does not have authentication, you can enable POP
before SMTP, them POP authentication is available (SP
5860 13)
[0-1/0/1]
0: Disable
1: Enable
5860 008 POP to SMTP Wait
When using POP before SMTP, this SP mode determines
the maximum wait time between POP authentication and
connection with SMTP. Communication stops if this time
is exceeded.
[0-3000/300]
5860 009 Rcv Protocol
This SP specifies POP3 protocol or switches off receiving.
1: POP3
Printer Engine Service Mode
119
To Next Page
Loading...
