5860 SMTP/POP3/IMAP
2: IMAP4
3: SMTP
5860 013 POP Auth Encrypt
If POP before SMTP is enabled, then you can use this SP
to enable or disable encryption mode for POP
authentication.
[0-2/0/1]
0: Automatic
1: No encryption
2: Encrypt
5860 014 POP Srv Port No. Input the POP server port number
5860 015 IMAP Srv Port No
This SP sets the number of the IMAP4 server port.
[1 to 65535/143/1]
5860 016 SMTP Rcv Port No
This SP sets the number of the port that receives SMTP
mail.
[1 to 65535/25/1]
5860 017 Receive Interval
This SP sets the timing for mail received at regular
intervals.
[2 to 1440/3/1 min.]
Note: Setting this SP to "0" switches off receiving mail at
timed intervals.
5860 019 Mail Keep Sett.
This SP setting determines whether received mail is stored
on the server.
0: Received mail not stored
1: All received mail stored
2: Stores only mail that generated errors during
receiving
5860 020
ParMail RectOut
[1 to 168/72/1]
Sets the amount of time to wait before saving a mail that breaks up during reception. The
received mail is discarded if the remaining portion of the mail is not received during this
prescribed time.
5. Service Tables
120
To Next Page
Loading...
