[0to1/0/1]
5869 RAM Disk Setting
5869 001
This SP enables and disables email sending and receiving. This setting determines the size
of the RAM disk (MB) that the machine uses to manage email sending and receiving.
[0 to 1/0/1]
0: Use. Allocates 46 MB for sending and 8 MB for receiving.
1: Do not use
5869 002
Adjusts the RAM Disk size for the PDL storage.
[0 to 255 / 4 / 1]
5870
Common KeyInfo W(riting)
Writes to flash ROM the common proof for validating the device for @Remote
specifications.
Note:
• These SP settings are required to connect @Remote or must also be set after the
board is replaced.
• Even if @Remote is not connected, these settings are used for Web validation, so at
least SP5870 003 must be enabled.
5870 001 Writing Writes the authentication data (used for NRS) in the memory.
5870 003 Initialize Initializes the authentication data in the memory.
5873
SDCardAppliMove
Allows you to move applications from one SD card another. For more, please refer to the
"SD Card Application Move" section.
5873 001 MoveExec Executes the move from one SD card to another.
5873 002 UndoExec This is an undo function. It cancels the previous execution.
5878
Option Setup Data Overwrite Security (DOS) Setup
Press [#Enter] to initialize the Data Overwrite Security option.
5886
ROM update
5. Service Tables
122
To Next Page
Loading...
