The setting of this SP allows or prohibits updating the ROM.
0:Yes, 1:No
5887
SD GetCounter
This SP outputs a text file ( .txt) that lists the counts for the application SD card inserted
into the SD service slot. Before executing this SP, you must first create a folder entitled
"SD_COUNTER" in the root directory of the SD card.
5902
Test Print
Prints the test pattern that you selected with SP 5902-003.
5902 001
1 Sheet Test
Prints one test pattern
5902 002
Cont Test
Prints consecutive copies of the test pattern
5902 003
Test Pattern
Selects a printer test pattern.
Use SP 5902 to print either one test pattern (5902-1) or more than one pattern. (5902-2).
Pattern:
0: Not Specified
1: Vertical Line (1dot)
2: Vertical Line (2dot)
3: Horizontal (1dot)
4: Horizontal (2dot)
5: Grid pattern Small
6: Grid pattern Large
7: Argyle Pattern Small
8: Argyle Pattern Large
9: Trimming Area
Printer Engine Service Mode
123
To Next Page
Loading...
