2. Left cover [A] ( x 1)
3. Plate [B] ( x 2)
4. Upper fusing unit assembly [C] ( x 4, springs x 2)
5. Right cover [D] ( x 1)
6. Lamp holders [E] ( x 1 each)
• Remove both springs before taking apart the fusing unit assembly. The reason for this is to relieve
pressure on the unit.
• When reinstalling the fusing unit assembly, install both springs last. The reason for this is to reset
the springs back to their default position.
3. Replacement and Adjustment
38
To Next Page
Loading...
