Why is my Ricoh All in One Printer feeding multiple sheets?
If your Ricoh All in One Printer is feeding multiple sheets of paper at once, fan the paper before loading it, ensuring the edges are even. Also, verify that the paper guides are correctly positioned. Use only supported paper types and avoid overfilling the tray past the upper limit. Only add paper when the tray is empty.
General| Print Technology | Laser |
|---|---|
| Resolution | 1200 x 600 dpi |
| Paper Capacity | 150 sheets |
| Connectivity | USB 2.0 |
| Monthly Duty Cycle | 20, 000 pages |
| Duplex Printing | Manual |
| Memory | 16 MB |
| Print Speed | 22 ppm |
| Supported Operating Systems | Windows, Mac OS |
Information on handling and recycling of electrical and electronic equipment as per national law.
Advice on environmental impact, recycled paper, duplex printing, and energy efficiency for users.
Guidance on the proper disposal of batteries and accumulators in the EU.
Special handling information for Perchlorate Material in California.
Details the external parts and controls of the machine.
Describes the interior of the machine and the print cartridge's function.
Explains the Smart Organizing Monitor utility for machine management.
Guides on switching LAN types and configuring IP addresses using Web Image Monitor.
Instructions for configuring IPv4, IPv6, and wireless LAN settings.
Steps for configuring an Ad hoc wireless connection via Smart Organizing Monitor.
Lists compatible paper types, sizes, and paper to avoid for optimal performance.
Illustrates the printable area and provides instructions for loading paper into trays.
Detailed steps for loading paper into the main paper tray.
Instructions for using the bypass tray for single-sheet feeding.
Guide to setting paper type and size using the Smart Organizing Monitor utility.
Covers fundamental printing steps and available print settings via the driver.
Instructions for two-sided printing and how to cancel print jobs.
Solutions for errors when paper settings do not match the loaded paper.
Introduction to the Web Image Monitor for remote machine configuration and status checks.
How to change the display language and navigate the Web Image Monitor menu.
Explains the differences between guest and administrator modes for accessing machine settings.
Details on configuring network interfaces and IPv4 addresses for connectivity.
How to check system status and configure network interface settings.
Comprehensive steps for setting up IPv4 parameters like IP, subnet, gateway, and DNS.
Guide to setting up IPv6 network parameters for the machine.
Covers SNMP settings, password management, and viewing machine details.
How to use the utility to diagnose and resolve machine status issues.
Steps to adjust machine settings like paper, energy saver, and firmware updates.
Instructions for printing diagnostic pages and performing firmware updates.
Step-by-step guide on how to replace the print cartridge in the machine.
Important warnings and steps for safely cleaning the machine's exterior and interior.
Addresses basic issues like power, printing, and noise with their respective solutions.
Troubleshooting common paper feed problems, jams, and multiple sheet feeding.
Procedures for safely removing jammed paper from the machine, including precautions.
Clearing jams from the bypass tray and accessing the rear cover for paper removal.
Troubleshooting common print quality issues and checking machine condition.
Solutions for printer errors, alignment problems, and slow printing.
Explains common error messages from the utility, their causes, and solutions.
Information about toner usage and precautions for moving the machine.
Guidance on proper machine disposal and contact points for support.
Information on the print cartridge's average page yield and usage notes.
Lists comprehensive specifications including paper handling, memory, power, and printing performance.
To Next Page
