When You Have Problems Operating the
Machine
This section describes common problems and messages. If other messages appear, follow the
instructions displayed.
Problem Causes Solutions
The machine has just been
turned on and the User Tools
screen is displayed, but the
User Tools menu has items
missing.
Functions other than the
copier function are not yet
ready.
Functions appear in the User Tools
menu when they become ready for
use. Time required varies by function.
Wait a little longer.
"Please wait." appears. This message appears when
the machine is warming up.
• Wait until the message
disappears. Do not turn off the
main power switch while the
message is displayed.
• If the machine is not ready in five
minutes, turn off the main power
switch and make sure the main
power indicator turns off. Wait at
least ten seconds and then turn
the main power switch on again.
If the machine is still not ready in
five minutes, contact your service
representative.
"Please wait." appears. The current environmental
condition is outside the
recommended temperature
range for the machine.
• Check the optimum environmental
conditions for the machine and
move it to a different location.
• Leave the machine for a while
and allow it to adapt to the
environment.
For details about the optimum
environmental conditions for the
machine, see "Optimum Environmental
Conditions After Moving the Machine",
Maintenance and Specifications .
When You Have Problems Operating the Machine
101
To Next Page
Loading...
Need help?
General
