6. Scan
This chapter describes frequently used scanner functions and operations. For the information not
included in this chapter, see Scan on the supplied CD-ROM.
Basic Procedure for Using Scan to Folder
• Before performing this procedure, refer to "Preparing to Send by Scan to Folder", Scan and
confirm the details of the destination computer. Also refer to "Registering Folders", Connecting the
Machine/ System Settings , and register the address of the destination computer to the address
book.
1. Press [Scanner]
2. Make sure that no previous settings remain
If a previous setting remains, press the [Reset] key.
3. If the E-mail screen is displayed, press [ ] to switch to the Scan to Folder screen
4. Place originals
5. If necessary, specify scan settings according to the original you want to scan
6. Specify the destination
7. Press [Start]
• When scanning from the exposure glass
If you are scanning only one original, press the [ ] key to send the scan file.
63
To Next Page
Loading...
Need help?
General
