Sending Originals Using the ADF
1. Press [Facsimile]
2. Make sure "Ready" appears on the screen
3. Place the originals into the ADF
For details about how to place originals, see "Placing Originals in the Auto Document Feeder",
Paper Specifications and Adding Paper
.
For details about how to place originals to send using the facsimile function, see "Placing Originals
to Send", Fax .
4. Configure scan settings
For details, see "Specifying Scan Settings", Fax .
5. Specify a destination
If you make a mistake, press the [Clear/Stop] key, and then enter again.
For details about specifying a destination, see "Specifying a Destination", Fax .
6. When sending the same original to several destinations (broadcasting), specify the next
destination
If you want to specify another destination manually right after specifying a destination manually,
press [Add Dest].
7. Press [Start]
4. Fax
50
To Next Page
Loading...
Need help?
General
