3. Copy
This chapter describes frequently used copier functions and operations. For the information not included
in this chapter, see Copy on the supplied CD-ROM.
Basic Procedure
To make copies of originals, place them on the exposure glass or in the ADF.
When placing the original on the exposure glass, start with the first page to be copied. When placing
the original in the ADF, place them so that the first page is on the top.
About placing the original on the exposure glass, see page 31 "Placing Originals on the Exposure
Glass".
About placing the original in the ADF, see page 31 "Placing Originals in the Auto Document Feeder".
To copy onto paper other than plain paper, specify the paper type in User Tools according to the weight
of the paper you are using. For details, see "System Settings", Connecting the Machine/ System Settings
.
The following procedure explains copying onto paper whose size and orientation matches that of the
originals exactly.
1. Press [Copy]
2. Make sure no previous settings remain
When there are previous settings remaining, press the [Reset] key.
3. Place the originals
4. Make desired settings
33
To Next Page
Loading...
Need help?
General
