Combine 1 Orig.
Copies one two-sided originals to one side of a sheet.
Combine: 2 Orig.
Copies two two-sided originals to one side of a sheet.
For SP 3600SF
Combine 1 Side (2 Orig.)
Copies two one-sided originals to one side of a sheet.
Combine 1 Side (4 Orig.)
Copies four one-sided originals to one side of a sheet.
Press the [Copy] key, and then select the setting items using the [ ] or [ ] key.
1. Press [Duplex/Combine/Series]
2. Select the combine mode Press [OK]
3. Select the paper tray
4. Place the originals Press [Start]
• You cannot apply this function to sheets longer than 356 mm (14 inches) fed from the bypass tray.
• The default setting for the original orientation is the unreadable direction ( ). When placing
originals in an unreadable direction, specify the original orientation. To specify the orientation,
select [Always Specify] for [Orientation] in [Copier Features], and then perform the following
procedure after Step 2. For details about the setting item, see "Copier Features", Copy .
1. Select the original orientation Press [OK]
• When placing originals on the exposure glass, press the [ ] key after all the originals have been
scanned.
• To cancel the One-Sided Combine function, press the [Duplex/Combine/Series] key twice.
3. Copy
42
To Next Page
Loading...
Need help?
General
