dressed by this section should only be handled by an au-
thorized RIDGID service technician.
Tool should be taken to a RIDGID Author ized Independent
Service Center or returned to the factory.
For information on your nearest RIDGID Author ized Inde -
pendent Service Center or any service or repair ques-
tions:
• Contact your local RIDGID distributor.
• Visit RIDGID.com to find your local RIDGID contact
point.
• Contact Ridge Tool Technical Service Department at
rtctechservices@emerson.com, or in the U.S. and
Canada call (800) 519-3456
Disposal
Parts of the K-45 drain cleaner contain valuable materials
and can be recycled. There are companies that specialize
in recycling that may be found locally. Dispose of the
com ponents in compliance with all applicable regula-
tions. Contact your local waste management authority for
more information.
For EC Countries: Do not dispose of elec -
trical equipment with household waste!
According to the European Guideline 2002/ -
96/EC for Waste Electrical and Electronic
Equipment and its implemen tation into na-
tional legislation, electrical equipment that is
no longer usable must be collected separately and dis-
posed of in an environmentally correct manner.
999-998-285.09_REV. G14
K-45 Drain Cleaning Machine
Machine Storage
The drain cleaner and cables must be
kept indoors or well covered in rainy weather. Store the
machine in a locked area that is out of reach of children
and people unfamiliar with drain cleaners. This machine
can cause serious injury in the hands of untrained users.
Service and Repair
WARNING
Improper service or repair can make machine un-
safe to operate.
The “Maintenance Instructions” will take care of most of
the service needs of this machine. Any problems not ad-
Catalog Model
No. No. Description
41937 — RIDGID Drain Cleaning
Gloves, Leather
70032 — RIDGID Drain Cleaning
Gloves, PVC
62067 T-201A Straight Flex Auger
62990 T-201 Straight Auger, 5" (12.5cm) Long
62995 T-202 Bulb Auger, 1
1
/
8
" (29mm) O.D.
63000 T-203 Bulb Auger,
7
/
8
" (22mm) O.D.
55457 T-225 Retrieving Auger
63065 T-217 Drop Head, 4" (100mm) Long
54837 T-204 “C” Cutter 1" (25mm)
63005 T-205 “C” Cutter 1
3
/
8
" (35mm)
63010 T-206 Funnel Auger, 3" (75mm) Long
63030 T-210 Grease Cutter, 1" (25mm)
63035 T-211 Grease Cutter, 1
3
/
8
" (35mm)
63040 T-212 Grease Cutter, 1
3
/
4
" (45mm)
63045 T-213 4-Blade Cutter, 1" (25mm)
63050 T-214 4-Blade Cutter, 1
3
/
8
" (35mm)
63055 T-215 4-Blade Cutter, 1
3
/
4
" (45mm)
52812 T-230 H-D “C” Cutter, 2" (50mm)
52817 T-231 H-D “C” Cutter, 2
1
/
2
" (64mm)
48482 T-250 Tool Set includes:
T-203, T-205, T-210, T217, A-13
Accessories and Tools That Fit C-4, C-6 and C-6IC Cables
Catalog
No.
68917
89410
76817
98072
23908
Model
No.
C-6429
A-39AF
Description
K-39/45 Inner Drum
Carrying Case
C-6 Cable Kit Includes:
– C-6
3
/
8
ʺ x 35ʹ (10mm x 10.7m) Cable
w/Inner Drum
– Torque Arm
– T-250 5 Piece Tool Kit
C-6IC Cable Kit Includes:
– C-6IC
3
/
8
ʺ x 35ʹ (10mm x 10.7m) Cable
w/Inner Drum
– Torque Arm
– T-250 5 Piece Tool Kit
Drum front and AUTOFEED Assembly,
Replacement AUTOFEED Cartridge
Accessories
WARNING
To Next Page
Loading...
