19
• Check the fit by attempting to turn the
closed lever. When the lever rotates, it is
not safe to use the bike. You have to open
it again to retighten it. Do this by turning
the locking nut one-half turn (while holding
quick release).
• Repeat the closing process and check the fit
again. When the lever no longer rotates, it
is clamped properly.
• Check the tightness of the wheel: lift the
wheel several inches o of the ground and
give the top of the tire a little whack. A
securely fixed wheel should remain in the
frame.
• Check the tight fit of saddle and handlebar
by trying to twist them.
TIP!
Components secured with a quick
release are at risk of theft.
If possible place an additional
lock on the wheels when you park
the E-bike.
DANGER!
Never ride a bike without rst
checking that the wheels are
securely attached to the frame
with a quick release or bolt.
If not securely attached, the
wheel could fall out during the
ride and lead to a severe injury!
Check the tight t of quick
releases, thru axles and bolts
even if you parked your E-bike
only shortly at an unattended
place. Do not ride your E-bike
with untightened quick releases.
To Next Page
Loading...
