RIESE & MULLER load - Page 83

83
PART TASK
BEFORE EVERY RIDE MONTHLY YEARLY SPECIAL INTERVALS
Lighting Check mounting screw
•
Tires Check air pressure
Check tread and sidewall
•
•
Brakes Check lever travel, pad thickness
and position on rim
•
Brake cables Visual check
•
Brake housing Inspect for leaks
•
Rear shock Maintenance (page 28), check function
•
Every 5,000 km
Suspension fork Check for play and leaks, check function
✖
Clean and lubricate monthly, see
guidlines of the manufacturer
Rims Check sidewall thickness /
wear indicator (possibly replace)
✖ After the second set of brake
pads at the latest
Rear swingarm Check function and bearing play
✖
Chain (derailleur) Check chain tension, oil chain
Check wear, possibly replace
•
✖ From 1,500 km
Chain (hub gear) Check chain tension, oil chain
Check wear, possibly replace
•
Every 1,000 km
✖ From 3,000 km
Crank Check, possibly retighten,
check chain ring wear
✖
Paint Protect
•
Wheels/spokes
Check concentricity and tension
•
Handlebar / stem Visual check
Exchange
•
✖ After a crash, 20,000 km or
4 years – whichever takes
place first
Headset Check bearing play
Relubricate
•
✖
Metallic surfaces Protect (except rim sidewalls, discs)
•
Hubs Check for bearing play, lubricate
✖
Pedals Check for bearing play, lubricate
✖
Seat post Clean seat tube, lubricate
•
Derailleur Clean and oil
•
Quick release Check that it is properly seated
•
Nuts and bolts Check (possibly retighten)
•
Valves Check that it is properly seated
•
Housing shifter/brake Remove, lubricate and reinstall
✖