Rigol DG4000 Series

Chapter 9 Store and Recall RIGOL
DG4000 Series User’s Guide
9-9
Copy
1. To Select the File to be Copied
Set Browser as “Dir” and use the knob to select the directory in which the file
to be copied is stored. Then set Browser as “File”, and use the knob to select
the file to be copied.
2. To Copy File
Press Copy, the generator will copy the file currently selected.
Paste
1. To Copy a File
Copy a file following the introduction in Copy .
2. To Select Paste Destination
Set Browser as “Dir” and use the knob to select a paste destination directory.
3. To Paste File
Press Paste, the generator will paste the copied file in the directory currently
marked by the cursor and display corresponding prompt message when the
paste operation succeeds.
Delete
1. To Select File or Folder to be Deleted
Set Browser as “Dir” and use the knob to select the directory in which the file
or folder to be deleted is stored. Then set Browser as “File”, and use the
knob to select the file or folder to be deleted.
2. To Delete File or Folder
Press Delete, the generator will delete the currently selected file or folder
(empty folder).