New Directory
DG4000 allows users to create new folders in external memory. Please make sure
that a USB storage device is inserted and identified by the instrument.
1. To Select Memory
In Store/Recall interface, set Browser as “Dir” and use the knob to select “D
disk”.
2. New Directory
Set Browser as “File”, use to open the 2/2 menu page and press New
Directory to enter the folder name input interface ( same as shown in Figure
9-2 or Figure 9-3).
Note: when “C Disk” is selected, this menu is unavailable.
3. To Input Folder Name
Input the new folder name following the introduction in Save .
4. To Save Folder
After finishing inputting the new folder name in the folder name input interface,
press Save and the generator will create a new empty folder under the current
directory.
To Next Page
Loading...
