Rigol DG4000 Series

Chapter 13 Specifications RIGOL
DG4000 Series User’s Guide
13-3
> 5MHz 500ps
Arb
Waveform Length
16k points
Vertical Resolution
14bits
Sample Rate
500MSa/s
Minimum Rise/Fall Time
Typical (1Vpp)
<5ns
Jitter (rms)
Typical (1Vpp)
≤5MHz 2ppm+500ps
> 5MHz 500ps
Interpolation Method
Off, Linear
Edit Method
Edit Points, Edit Block
Harmonic
Harmonic Order
≤16
Harmonic Type
Even, Odd, All, User
Harmonic Amplitude
can be set for all harmonics
Harmonic Phase
can be set for all harmonics
Output Characteristics
Amplitude (into 50 Ω)
Range
≤20MHz: 1mVpp
to 10Vpp
≤70MHz: 1mVpp
to 5Vpp
≤120MHz: 1mVpp
to 2.5Vpp
≤160MHz: 1mVpp
to 1Vpp
≤20MHz: 1mVpp to
10Vpp
≤70MHz: 1mVpp to
5Vpp
≤100MHz: 1mVpp
to 2.5Vpp
≤20MHz: 1mVpp to
10Vpp
≤60MHz: 1mVpp to
5Vpp
Accuracy
Typical (1kHz Sine, 0V Offset, >10mVpp, Auto)
± 1% of setting ± 2mV
Flatness
(relative to 1kHz Sine wave,
500 mVpp, 50Ω)
Typical
≤10MHz：± 0.1dB
≤60MHz：± 0.2dB
≤100MHz：± 0.4dB
≤160MHz：± 0.8dB
Typical
≤10MHz：± 0.1dB
≤60MHz：± 0.2dB
≤100MHz：± 0.4dB
Typical
≤10MHz：± 0.1dB
≤60MHz：± 0.2dB
Units
Vpp, Vrms, dBm
Resolution
1mV or 3bits