Rigol DG4000 Series

RIGOL Chapter 13 Specifications
DG4000 Series User’s Guide
13-6
Modulating Frequency
2mHz to 50KHz
[Mod/FSK/Trig] Input
Input Range
75mVRMS to ± 2.5Vac+dc
Input Bandwidth
5MHz
Input Impedance
100Ω
Burst Characteristics
Carrier Waveform
Sine, Square, Ramp, Pulse, Noise, Arb (except DC)
Carrier Frequency
2mHz to 100MHz
2mHz to 100MHz
2mHz to 60MHz
Burst Count
1 to 1 000 000 or Infinite
Start/Stop Phase
0° to 360°
Internal Period
2μs to 500s
Gated Source
External Trigger
Trigger Source
Internal, External or Manual
Trigger Delay
0ns to 85s
Sweep Characteristics
Carrier Waveform
Sine, Square, Ramp, Arb (except DC)
Type
Linear, Log or Step
Direction
Up or Down
Start/Stop Frequency
1μHz to 160MHz
1μHz to 100MHz
1μHz to 60MHz
Sweep Time
1ms to 300s
Hold/Return Time
0ms to 300s
Trigger Source
Internal, External or Manual
Mark
Falling edge of Sync signal (programmable)
Counter Specifications
Function
Frequency, Period, Positive/Negative Pulse Width, Duty Cycle
Frequency Resolution
6 digits/second (Gate Time =1s)
Frequency Range
1μHz to 200MHz
Period Measurement
Measurement Range
5ns to 16 days
Voltage Range and Sensitivity (Not modulation signal)
DC Coupling
DC Offset Range
± 1.5VDC
Input Attenuation:
“closed”
1μHz to 100MHz
50mVRMS to
± 2.5Vac+dc