Rigol DM3000 Series User Manual

RIGOL
© 2007 RIGOL Technologies, Inc.
User‟s Guide for DM3000 Series
2-55
REC#
In Stop menu, press REC# button to set the sample points of Data Log, stop the
sampling when reach the set number.
Figure 2- 65
The setting scope of REC# is from 1 to 2M points. The default setting is 1,000 points.
Infinity
In Stop menu, press Infinity button to set the Data Log don‟t stop sampling until you
force* to stop the sampling.
Figure 2- 66
*NOTE:
Press button and hold more than two second to stop the sampling of Data Log.
This operation is applied to any Data Log stop mode.

Rigol DM3000 Series Specifications

General

Brand	Rigol
Model	DM3000 Series
Category	Multimeter
Language	English