RIGOL Chapter 1 Specifications
DP1308A Service Guide
Voltage Programming Speed (within 1% of total variation range)
Accuracy ± (output
percentage + offset)
1.5ms (OVP ≥3V)
<10ms (OVP <3V and OCP)
235 mm (W) x 155 mm (H) x 384 mm (D)
100Vac+10%, 115Vac+10%, 220Vac+10%,
230Vac+10% (250VAC Max)
Full rated output: 0℃ to 40℃
At higher temperature: the linearity of the output
current falls to 50% at the maximum temperature 55℃
Remarks:
[1] Specifications are for one hour warm-up at 25℃.
[2] The maximum time required for regulating corresponding output after receiving the APPLy and
SOURce commands.
[3] The variation of the output within 8 hours after the instrument is warmed up for 30 minutes
and both the load circuit and environment temperatures are constant.
To Next Page
Loading...
Need help?
General
