Outside View Drawing of the Instrument
The figure below is the outside view drawing of DP1308A. You need to get a basic
understanding of the mian parts of the instrument before disassembling and
assembling the instrument. When disassembling or assembling the instrument, please
follow the operation steps and take care not to scratch the surfaces of the parts or the
PCB board.
The recommended disassemble procedures are as follows (revert the procedures
below when assembling the instrument).
Front and rear rubber covers → rear cover → metal body → up panel of the analog
circuit → bottom panel of the analog circuit → front panel → keyboard → power
frequency transformer → fuse seat and fan → GPIB board → digital circuit board
Figure 4-1 DP1308A Outside View Drawing
To Next Page
Loading...
