General Inspection
1． Inspect the shipping container for damage
Keep the damaged shipping container or cushioning material until the contents of
the shipment have been checked for completeness and the instrument has
passed both electrical and mechanical tests.
The consigner or carrier shall be liable for the damage to instrument resulting
from shipment. RIGOL would not be responsible for free maintenance/rework or
replacement of the unit.
2． Inspect the instrument
In case of any damage, or defect, or failure, notify your RIGOL sales
representative.
3． Check the accessories
Please check the accessories according to the packing lists. If the accessories are
incomplete or damaged, please contact your RIGOL sales representative.
To Next Page
Loading...
