Rigol DP1308A - Chapter 4 Disassemble and Assemble; Disassemble;Assemble Notices

Chapter 4 Disassemble and Assemble RIGOL
DP1308A Service Guide
4-1
Chapter 4 Disassemble and Assemble
Disassemble/Assemble Notices
Notices:
 Do not disassemble the instrument unless for working requirement.
 Only authorized personnel can disassemble the instrument.
 Cut off the power supply before disassembling the instrument.
 Please wear anti-static gloves or make other anti-static precaution when
disassembling the instrument.
 Please use proper tools and follow the correct steps.
 Take care not to deform the metal structure and be scuffed when disassembling
the metal structures.
Tools Required:
 Phillips screw driver T10, T15
 Side cutting plier
WARNING
Make sure that the power supply is cut off before disassembling the
instrument. Only personnel with relative training or relative qualification
certification can disassemble the instrument.