General Care and Cleaning
General Care
Do not store or leave the instrument in where the instrument will be exposed to direct
sunlight for long periods of time.
Caution
To avoid damage to the instrument or the probe, do not expose it to spray, liquid or
solvent.
Cleaning
Clean the instrument regularly according to its operating conditions. To clean the
exterior surface, perform the following steps:
1. Clean the loose dust on the surfaces of the instrument and probe using a soft
cloth. When cleaning the LCD, take care to avoid scarifying it.
2. Wipe the instrument with a lint- free cloth (make sure that the power supply is
cut off). You can use mild detergent or water. Do not use caustic chemical
detergent to avoid damging the instrument.
WARNING
To avoid injury resulting from short circuit, make sure the instrument is
completely dry before reconnecting it to a power source.
To Previous Page
Loading...
