Rigol DS1000Z Series User Manual

RIGOL Chapter 14 System Function Setting
DS1000Z User’s Guide
14-4
from 0 to 255. You are recommended to ask your network administrator for an
IP address available.
Press IP Address and use to input the desired IP address. This setting will
be saved in the non-volatile memory and if
Power-on Recall is set to “Last”,
DHCP and Auto IP will be “Off” and the oscilloscope will load the preset IP
address automatically at the next power-on.
2. Set the Subnet Mask.
The format of the subnet mask is nnn.nnn.nnn.nnn; wherein, the range of the
nnn is from 0 to 255. You are recommended to ask your network administrator
for a subnet mask available.
Press Mask and use to input the desired subnet mask. This setting will be
saved in the non-volatile memory and if
Power-on Recall is set to “Last”,
DHCP and Auto IP will be “Off” and the oscilloscope will load the preset subnet
mask automatically at the next power-on.
Set the Gate
You can set this paramter In Auto IP and Static IP mode.
The format of the gate is nnn.nnn.nnn.nnn; wherein, the range of the first nnn is
from 0 to 223 (except 127) and the ranges of the other three nnn are from 0 to 255.
You are recommended to ask your network administrator for a gate address
available.
Press Gate and use to input the desired gate address. This setting will be saved
in the non-volatile memory and if Power-on Recall is set to “Last”, DHCP and
Auto IP will be “Off” and the oscilloscope will load the preset gate address
automatically at the next power-on.
Set the Domain Name Server
You can set this paramter In Auto IP and Static IP mode.

Rigol DS1000Z Series Specifications

General

Brand	Rigol
Model	DS1000Z Series
Category	Test Equipment
Language	English