Chapter 10 Pass/Fail Test RIGOL
MSO2000A/DS2000A User’s Guide 10-1
Chapter 10 Pass/Fail Test
During the product design and manufacture process, you usually need to monitor the
change of the signal or judge whether the product is up to standard. The pass/fail
test function of MSO2000A/DS2000A oscilloscope can fulfill this task perfectly.
The contents of this chapter:
To Enable Pass/Fail Test
To Select Source
Mask Range
To Set Test Results Output Type
To Save the Test Mask
To Load the Test Mask
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
