EasyManua.ls Logo

Riken Keiki 04 Series - Page 10

Riken Keiki 04 Series
81 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2. Important Safety Information 2-1. Danger information
10 / 79
The battery specifications are as follows:
<Dry cell specifications>
The explosion-proof class is Ex ia IIC T4 Ga.
The ratings are as follows:
Japan models:
Power source: 3 V DC (Toshiba LR03 battery × 2)
Ambient temperature: 40 °C to +60 °C
Export models:
Power source: 3 V DC, 1 mA (Toshiba LR03, Duracell MN2400, or Duracell PC2400 battery × 2)
Ambient temperature: 40 °C to +60 °C
Does not accept rechargeable batteries.
<Rechargeable battery specifications>
The explosion-proof class is Ex ia IIC T3 Ga.
The ratings are as follows:
Power source: 2.4 V DC, 1 mA (Panasonic eneloop (BK-4MCC) battery × 2)
Ambient temperature: 40 °C to +60 °C
Use two eneloop (BK-4MCC) (Panasonic) batteries. Does not accept dry cell batteries.
Use a BQ-CC23 (Panasonic, Delta Vt control recharging) recharger.
The rating for recharging is 1.5 V DC, 550 mA.
Recharge the batteries only in nonhazardous locations.
If the product is used as an explosion-proof device, note that the explosion-proofing rating conditions specify the
battery type to be used.
The battery types are as follows:
<Dry cell specifications>
Japan models:
Power source: 3 V DC, 1 mA (Toshiba LR03 battery × 2)

Other manuals for Riken Keiki 04 Series

Related product manuals