Rinstrum 5200

Rinstrum - 5200 Communications Manual Rev 1.2
Page 14 0025-605-120
2.4.5. CDL: Set Zero
Set the zero dead load cancellation. This is equivalent with pressing the <ZERO>
key on the front of the instrument.
General Details
No. of Parameters Save Changes Changes Used Increment Trade Counter
0 Automatic Immediately No
Example
Set Zero.
Command Response Details
S01; Select Instrument 1
CDL; 0 CRLF Zero dead load set successfully
CDL; 2 CRLF Failed due to weight out of zero range