Rinstrum - 5200 Communications Manual Rev 1.2
Page 28 0025-605-120
2.4.17. ICR: Set Measurement Rate
Set the fundamental measurement frequency of the instrument.
General Details
No. of Parameters Save Changes Changes Used Increment Trade Counter
1 With TDD1 Immediately Yes
Parameter Details
Parameter Description Range Default Required
1 Measurement rate in Hz 12.5 to 60 50 No
Example
Command Response Details
S01; Select Instrument 1
ICR?; 50 CRLF Query measurement rate
ICR60; 0 CRLF Change to 60Hz
TDD1; 0 CRLF Save Setting
To Next Page
Loading...