Rinstrum - 5200 Communications Manual Rev 1.2
0025-605-120 Page 29
2.4.18. IDN: Set Identification
This is used to set the instrument identification string.
General Details
No. of Parameters Save Changes Changes Used Increment Trade Counter
1 With TDD1 Immediately No
Command Parameter Details
Parameter Description Range Default Required
1 Identification String 15 Characters "" No
Query Parameter Details
Parameter Description Range Default Required
1 Identification String 15 Characters "" -
2 Serial Number String 0000000 to
9999999
(Serial Number) -
3 Version String (Version) -
4 Model 5200 -
5 Licence configuration -
Note: Only the identification string may be changed. Other parameters are fixed at
the factory and are available for information only by using the IDN? query.
Example
Command Response Details
S01; Select Instrument 1
IDN?; " ","1549061","V1.0P0","5200",0 CRLF Query Current
Identification
IDN"Silo X"; 0 CRLF Change Identification
String to "Silo X”
TDD1; 0 CRLF Save Setting
To Next Page
Loading...
Need help?
General
