ProSYS User's Manual 61
Quick
Key
Function Description
0 More...
01 Cancel
Report
Sends a "Cancel Alarm" report message to the Monitoring
Station. This function is used if the alarm was activated by
mistake.
02 Overload
Restore
The Grand Master/Installer /Sub-installer/Manager can use
this option to restore overloading of the system’s Switched
Power Supply. If overload condition is still present,
disconnect all loads from AUX. Output.
03 Check Credit Use this function to receive information by SMS of the
credit level in your Prepaid SIM card. The ProSYS will send
SMS Credit Level Request message (User menu: Quick
Key [4][0][4][1]) to the provider's phone (User menu: Quick
Key [4][0][4][2]). Once the SMS is received by the provider,
the SIM’s credit level is sent back and displayed on the
keypad's LCD display or sent to the Follow Me (if defined).
04 Reset SIM After charging a prepaid SIM card, the user has to reset the
SIM Expire Time manually. The time duration for expiration
is defined by your installer.
05 User Call Use this function to receive the SIM credit level using the
voice channel.
Upon accessing this option, a dial tone is received and the
ProSYS keypad functions as a GSM telephone. You can
dial and listen to messages as with a regular telephone. To
end the call press the
key.
Note the following :
1. The outgoing call will always be executed through the
GSM channel.
2. Talking is not optional during the call.
3. This option can be used to get any provider information.
The call can be established to any phone number.
3 View
1 Trouble Should be used when the system has detected a problem,
which is evidenced by the rapid flashing of the Power LED,
as described on page 66.
2 Alarm
Memory
Allows the viewing of the five most recent alarm conditions
stored by the system.
3 Not Ready
Status
Allows the viewing of all "not ready" zones.
To Next Page
Loading...
