64 ProSYS User's Manual
Quick
Key
Function Description
3 Next Arm Used to automatically Away arm a disarmed system at a
specific time within the next 24 hours. Next Arm works for
one time only since the system deletes the setting after it is
acted upon.
4 Next Disarm Used to automatically disarm an armed system at a specific
time within the next 24 hours. Next Disarm works for one
time only since the system deletes the setting after it is
acted upon.
5 Scheduler Enables you to define a weekly schedule with up to two
time intervals per day, during which the system
automatically arms, activates UOs, or prevents users from
disarming, as described on page 45.
6 Vacation Use to define up to 20 vacation periods and the partitions
that will be armed automatically during vacation.
7 User Limit. This feature is used to enable or disable a user from any of
the user limitation scheduling programs (Quick key
[6][code][5][xx][3]).
Note that deleting the schedule is not sufficient in order to
disable a user from the user limitation schedule. You
should also delete the user in this programming location.
7 Installer Prog
1 Advanced Accesses the full menu of programming options.
2 Selected Accesses a limited menu of programming options.
NOTE:
Refer to the ProSYS Installation and Programming Manual for more information about the
Installer Prog functions.
8 Access Control
1 Settings Defines the door mode for each door and the reader criteria
for each reader in the system.
2 Time
Schedule
Configures the time schedules by which users can access
the system.
3 Group
Access
Defines access to doors for groups of users during specific
time periods.
4 Record
Users
Adds Arm/Disarm users and Enter/Exit users to the system.
To Next Page
Loading...
