ProSYS User's Manual 65
Quick
Key
Function Description
5 User
Settings
Defines settings for users, including assigning PIN
(Personal Identification Number) codes, assigning users to
specific access groups, and deleting users.
6 Open Door Remotely opens any door from any keypad that has
previously been defined in the system.
NOTE:
Refer to the Access Control User's Manual for more information about the Access Control
functions.
9 Miscellaneous
1 Printer 1 on Activates printer 1
2 Printer 1 off Deactivates messages to
printer 1
3 Printer 2 on Activates printer 2
1 Printer
Control
(to control
on-line
printing)
4 Printer 2 off Deactivates messages to
printer 2
2 Anti-code Some systems (defined during installation of the systems)
are not ready to Arm after an alarm or tamper condition. To
restore the system to Normal Operation mode, a technician
code or an
Anti-code must be entered. Entering the code supplied by
the technician at this location will restore the system to the
Normal Operation mode.
3 Duress
Restore
Deactivates a latched UO that has been activated as a
result of a duress code being entered.
4 Voice Msg Customizes the spoken messages that are announced
when the user accesses the system from a remote
telephone. Refer to the Voice Module Programming and
Operations Manual for more information.
5 Key Custom Records a series of commands and assigns them to a
function key. For detailed information refer to page 52.
To Next Page
Loading...
