Riso Network Card - Page 41

Utility Software Guides
<Column> About RISO-PRINT
40
When using IPP
You can send a print job to a remote network printer over the Internet using this protocol.
1
Select [RISO] - [RISO Network Card]
from the [Program] list in the [Start]
menu and click on [RISO-PRINT].
The [Add RISO-PRINT Port] Wizard will begin.
2
Check that your RISO printer is on
and connected to the network, then
click on the [Next] button.
3
Select [Print in IPP (Internet Printing
Protocol)], and click on the [Next]
button.
4
Choose whether you wish to con-
nect to a proxy server for Internet
access or not, and click on the [Next]
button.
In the case that you wish to use a proxy server,
select [Configure the proxy server manually]
and enter an appropriate [Server Address] and
[Port Number].
5
Enter the URL for your RISO printer,
and click on the [Next] button.
The URL for the RISO printer is:
"http://(the RISO printer's IP Address)/ipp/lp"
Clicking on the [Next] button will begin the search
for the RISO printer.