General remarks
© robatherm 5
General remarks
If the AHU is delivered in several units, they must be assembled in accordance with these instructions
and properly connected to the duct system. All protective devices must be active.
If ready-to-use AHUs (complete machines) are assembled from non-operational AHUs (partly
completed machines), the person responsible for this assembly must carry out conformity evaluation,
issue a certificate of conformity, and attach the CE marking.
Information about these instructions
These instructions will facilitate safe and efficient use of the AHU.
All persons working on the AHU must thoroughly read and understand these
instructions before starting any kind of work.
Safe working is dependent on adhering to all safety information and instructions.
Further information
The instructions describe all the available options. Whether and which options are available in the AHU
depends on the options selected and the country for which the AHU is intended. The illustrations
serve as an example and may differ.
To Next Page
Loading...