Security
© robatherm 9
Personnel qualification
The work described in this section may only be performed if the person has the following
qualifications:
Qualified person in accordance with pressure equipment regulation
Qualified electrician
Registered gas installer
Refrigeration specialist
Crane operator
Mechanic
Forklift driver
What to do in case of danger
Fire protection
Solvent-welding agent (Rhenofol solvent-welding agent (THF) –
tetrahydrofuran) and sealing paste (Rhenofol paste)
Solvent-welding agents and sealing paste may contain toxic and environmentally
hazardous substances. Fumes can form an explosive mixture with air. Fumes are
heavier than air and spread at floor level. Ignition is possible over greater distances.
During thermal decomposition, harmful gases and fumes may be generated, and
explosive peroxides may be formed.
• Use self-contained respiratory protection.
• Wear chemical protective suit.
• Cool endangered tanks from a safe distance using water spray.
• Do not use a direct high-pressure water spray for extinguishing.
• For extinguishing, use carbon dioxide (CO
2
), extinguishing powder, or water
spray. Fight larger fires with water spray or alcohol-resistant foam.
• Do not allow extinguishing water contaminated with pollutants to enter
waterways or waste water system.
• Comply with the safety data sheet of the manufacturer.
To Next Page
Loading...