Roberts Stream 67 - Selecting a Track

56
CD/MP3/WMA.
EjectingaCD
1. To take out the CD, applyalongpress on the CD Eject button (on the top panel of
the unit). The display will show 'Eject'. In order to protect the disc if it is not removed,
the unit will reload the CD after 10 seconds and then enter standby mode.
Selectingatrack
1. While the CD is playing, press either the Next or Previous buttons to change to the
desired track. The updated track number is shown in the display.
2. You can also skip tracks when the player is paused. Skip to the desired track using
the Next or Previous buttons, release the button when the desired track is displayed.
3. Press the Play / Pause button to play the selected track.
Selectingatrack
1. For track numbers 1-10 simply press the corresponding digit button on the remote
control. For track numbers ten and above press the required digits using the 10/0
button to enter the digit zero.
2. If the track number exceeds the number of tracks on the CD, then the last track on
the CD will be played.
File numbers up to 512 may be entered. The numbers of les in folders are added
together. So, for example, if the rst two folders each contain 10 les, then entering
15 will play the fth le in the second folder.
CD
12:34
T015 64:44
Eject
CD
12:34
T001 00:15
Playing
CD
12:34
T016 00:20
Playing
DAB
30