Roberts Stream 67 - Inactive Standby feature; USB socket for smartphone or tablet charging

80
Inactive Standby feature
The Inactive Standby timer allows your sound system to save power by
automatically going to Standby if no controls are used for a period of time.
By default this period is set to 8 hours but you may change it if you wish.
1. With your audio system switched on, Press Menu.
2. Choose 'Main menu' and then 'System settings'.
3. Choose 'Inactive Standby' and then choose from 2, 4, 6, 8 hours
or Off.
4. Press Select to conrm setting.
5. Your audio system will go into standby after the selected time has
expired. Setting Inactive Standby to Off will disable this feature.
USBsocketforsmartphoneortabletcharging
Your audio system has a USB socket which can be used for charging a
smartphone, tablet or other similar devices.
Charge time may vary and in some cases may take longer to charge than
when using the manufacturers charging unit supplied with the device.
1. Ensure your audio system is plugged in.
2. Connect your device to the USB charging socket on the rear of your
audio system.
3. Your device will begin to charge. Once your device has charged remove
the USB lead.
Off
2 hours
4 hours
6 hours
8 hours
Timeout
*
Backlight
Equaliser
Streaming audio quality
Network
Time/Date
Inactive Standby
System settings
DisplayandAudio.
Smart Audio System
Internet Radio/DAB/DAB+/FM RDS/Bluetooth/CD/USB
DAB
30