Roberts Stream 67 - Dissolve a group

74
Multi-room&UNDOK.
Dissolveagroup
You can dissolve a current group.
1. Access the menu for the current mode, press Menu.
2. Press Menu Up or Down until 'System settings' is highlighted on the display.
3. Press Select to enter the settings menu.
4. Press Menu Up or Down until 'Multi-room' is highlighted on the display.
Press Select.
5. Press Menu Up or Down until 'Dissolve group' is highlighted on the display.
Press Select.
6. The current group will be dissolved.
Each of the products that were in the group can now be operated individually.
Alarms and Multi-room
If your audio system is congured as part of a multi-room group, then the audio
system will remove itself from that group when the audio system switches itself
on as a result of an alarm having been set. This is so that an alarm sounding
on one audio system will not cause all of the other products in the group to be
activated at the same time.
If you wish to use your audio system as part of a multi-room group after using
the alarm function, you will need to add the audio system back into the group
manually. This is most easily performed using the UNDOK app as described
on page 66.
Dissolved
CD
Bluetooth
Aux in
Sleep
Alarms
System settings
Main menu
Factory Reset
Software update
Setup wizard
Info
Multi-room
Subwoofer
System settings
View details
Create new group
Add to group
List current clients
Leave group
Dissolve group
Multi-room
DAB
30