Robin SlimLine - Installation; 3.1 Surface Mount Package Contents

gf9
9
Manual Robin SlimLine ENG - v. 1.0.0
3 Installation
There are two versions of the Robin SlimLine, one for surface mount installation and one for flush
mount installation.
For Surface mount installation, a surface mount box is nessecary (sold seperately), for a Flush
mount installation, a flush mount box is nessecary (sold seperately).
3.1 Package contents of the Robin SlimLine Surface mount
The Robin SlimLine for Surface mount
 1 bottom screw
 4 screws
 4 wall plugs (6mm)
 Engravable label
 Double-sided tape for the label
 Connector with cable-ends for connecting the build in relay
I
Installation