Robin SlimLine - Page 21

gf20
20
Manual Robin SlimLine ENG - v. 1.0.0
Teams settings
SIP protocol
Username
Password
Register
Expires
Registration status
Select the SIP protocol, UDP or TCP, UDP is default
Enter the username as provided to you in the Cyber-
Gate admin portal
Enter the password as provided to you in the Cyber-
Gate admin portal
Activates or deactivates registration to for registration
to the CyberGate service
Period of time the SIP door intercom will re-register.
Shows registration status
Teams advanced:
DSCP Class
SIP DSCP Class
Audio RTP DSCP Class
Video RTP DSCP Class
---------------------------------
Audio RTP port start
Audio RTP port end
Video RTP port start
Video RTP port end
RTP port random
SIP port random
The DSCP class is used for Quality of Service.
Select the DSCP class for all SIP traffic
Select the DSCP class for RTP audio
Select the DSCP class for RTP video
------------------------------------------------------------------
Enter the lowest IP port that may be used for the
RTP audio stream
Enter the highest IP port that may be used for the
RTP audio stream
Enter the lowest IP port that may be used for the
RTP video stream
Enter the highest IP port that may be used for the
RTP video stream
Use random RTP ports (within the specified range)
Use a random SIP port
C
Configuration