Robin SlimLine - Page 40

gf39
39
Manual Robin SlimLine ENG - v. 1.0.0
Use STUN for NAT address discovery
Stun server
Stun port
Stun status
The STUN server that will be used to retrieve the
WAN IP-address (default STUN server: stun.xten.
com)
The connection port of the STUN server (default:
3478)
Displays the status of the STUN request and the
retrieved WAN IP-address
Use inband STUN for NAT address discovery
Inband stun server
Stun port
Stun status
The STUN server that will be used. The Outbound
proxy host will be used as source
The connection port of the STUN server (5060)
Displays the status of the STUN request
C
Configuration