Robin SlimLine - Page 42

gf41
41
Manual Robin SlimLine ENG - v. 1.0.0
Settings:
Enable RTSP server
RTSP port
Require authentication
Username
Password
Allow Multicast
Multicast address
Enable keep alive
Keep Alive Timeout
---------------------------------
DSCP class
RTSP DSCP Class
Audio RTP DSCP
Class
Video RTP DSCP Class
---------------------------------
Enable RTSP support
Change the RTSP port (default 554)
Use RTSP authentication
RTSP username
RTSP password (needs to be defined)
Enable Multicast*
Set the multicast address
Enable RTSP ‘keep alive’
Set the keep alive timeout
------------------------------------------------------------------
The DSCP class is used for Quality of Service.
Select the DSCP class for all SIP traffic
Select the DSCP class for RTP audio
Select the DSCP class for RTP video
------------------------------------------------------------------
* Multicast will reduce the load on the network and the intercom. ! Note: Not every video
application supports multicast. !
C
Configuration