Robomow MC300 Operating Manual

47
12. Accessories
Blade
Keep a spare blade on
hand.
A sharp blade is important
for safety and best cutting
performance.
Battery
Used to replace the
existing battery and
refresh cutting capacity.
Perimeter Wire
For larger lawns or
additional zones.
Peg Pack
Used to fasten the
Perimeter Wire to the
ground.
For larger lawns or
additional zones.
Wire Repair Connectors
Used for repairing or
splicing wires
(as needed).
Plot Connectors
Used for connecting the
Perimeter Wire to the
Base Station or Perimeter
Switch.
Base Station and
Power Box
Used for:
◦ Enabling multiple
mowing cycles in a
Separated Zone
◦ Upgrade a model
without a Base Station
to work in a fully
automatic mode.
Remote Control
Used to Manually drive
and mow anywhere.
Includes a Safety
function to prevent
accidental use.
Perimeter Switch
For zones that are not
connected to the Base
Station.
Batteries Pack for
Perimeter Switch
Preferable for areas
where electricity is not
available or not close
enough to the Perimeter
Switch
Robomow App
Enables friendly an
intuitive operation of your
Robomow and opens
more menu options and
features, which are not
available through the
mower Operating Panel.
GSM Module
Enables remote
alerts through the
Robomow App
(for all RC and TC
models).

Robomow MC300 Specifications

General

Type	Robotic lawn mower
Cutting width	280 mm
On/off switch	Yes
Cutting system	-
Recommended lawn area	300 m²
Maximum cutting height	60 mm
Minimum cutting height	15 mm
Grass collecting volume	- L
Battery type	LiFePO4
Power source	Battery
Battery voltage	26 V
Battery technology	Lithium

Weight and Dimensions

Depth	460 mm
Width	630 mm
Height	210 mm
Weight	11100 g