Chapter 7-3
Setting Robomow and using Advanced Features
7.2.1 Zones setup
Use “Zones setup” to set specific operation options to specific zones of your
lawn.
P When in “Zones Setup” Press
.
P Scroll
to choose the specific zone you want to set up.
P Press
.
Work Time
Use the Work Time option to set an operating time different than the default
MAX timing.
You may use the Work Time option for up to 3 different zones. Each of the
selected zones may have a different work time. This is very helpful when the
zones are different in size, thus requiring different mowing times.
) For the Base Station zone (only on RL2000), setting the
“Work Time” sets the operating time used in Manual Depart
from the Base Station.
You may also set a specific work time per operation. This is set as part of
setting the automatic weekly program (see Chapter 5).
To Next Page
Loading...
