Chapter 7-4
Robomow RL555, RL855, RL2000
Learn Edge
For Non-Base Zones Only:
Use the “Learn Edge” option to set (“teach”) a distance for edge mowing
that is different from Robomow’s default (1.5 to 2 rounds around the
Perimeter Wire). For example, you may wish it to learn to do it at a distance
of one full round.
This newly learnt distance will remain until edge mowing is learnt again or
until you set it back to Robomow’s default.
) Position Robomow to start edge mowing.
) Reinsert Manual Controller to its holder.
Adjust the controller and its coil until it is at level with top of Robomow.
) Follow the steps described here to start the “Learn Edge”
process.
) Robomow drives around the Perimeter Wire. Follow it and
press the
button when the desired distance has
been reached.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
