Robustel M1200 - Page 43

Robustel M1200 User Guide
RT_UG_M1200_v.1.0.2 9 Apr., 2018 43/78
Cellular
Item
Description
Default
General Settings
Index
Indicate the ordinal of the list.
--
SIM Card
Show the currently editing SIM card.
SIM1
Phone Number
Enter the phone number of the SIM card.
Null
PIN Code
Enter a 4-8 characters PIN code used for unlocking the SIM.
Null
Extra AT Cmd
Enter the AT commands used for cellular initialization.
Null
Telnet Port
Specify the Port listening of telnet service, used for AT over Telnet.
0
Cellular Network Settings
Network Type
Select from “Auto”, “2G Only”, “2G First”, “3G Only”, “3G First”.
 Auto: Connect to the best signal network automatically
 2G Only: Only the 2G network is connected
 2G First: Connect to the 2G Network preferentially
 3G Only: Only the 3G network is connected
 3G First: Connect to the 3G Network preferentially
Auto
Band Select Type
Select from “All” or “Specify”. You may choose certain bands if choosing
“Specify”.
All
Advanced Settings
Debug Enable
Click the toggle button to enable/disable this option. Enable for debugging
information output.
ON
Verbose Debug
Enable
Click the toggle button to enable/disable this option. Enable for verbose
debugging information output.
OFF