Robustel M1200 - Page 45

Robustel M1200 User Guide
RT_UG_M1200_v.1.0.2 9 Apr., 2018 45/78
Status
Item
Description
Signal Strength
Show the signal strength detected by the mobile.
Bit Error Rate
Show the current bit error rate.
PLMN ID
Show the current PLMN ID.
Local Area Code
Show the current local area code used for identifying different area.
Cell ID
Show the current cell ID used for locating the gateway.
IMEI
Show the IMEI (International Mobile Equipment Identity) number of the radio
module.
Firmware Version
Show the current firmware version of the radio module.
This page allows you to check the AT Debug.
AT Debug
Item
Description
Default
Command
Enter the AT command that you want to send to cellular module in this
text box.
Null
Result
Show the AT command responded by cellular module in this text box.
Null
Click the button to send AT command.
--